Electronics Starter Kit
The Electronic Starter Kit is a comprehensive set of sensors, actuators, and interface modules designed for learning and prototyping in electronics and IoT.
Overview
Ideal for beginners and developers, it enables hands-on experience in building interactive, sensor-driven, and automated systems.
Kit Includes
- Arduino Development Board ( Developed By Atya Technologies ) 1U
- Mini USB Cable 1U
- Power Adapter 12v 1 Amp 1U
- Breadboard 1U
- Multimeter 1U
- Diodes (1N4007) 1U
- Voltage Regulator 7805 with heatsink 1U
- DC motor with fan blades 1U
Jumper Wires
| S.NO | Jumper Wires | Quantity |
|---|---|---|
| 1 | M-M | 40 |
| 2 | M-F | 40 |
| 3 | F-F | 40 |
Connectors
| S.NO | Connectors | Quantity |
|---|---|---|
| 1 | 1*4 | 5 |
| 2 | 1*6 | 2 |
| 3 | 1*7 | 2 |
Sensors
| S.NO | Sensors | Quantity |
|---|---|---|
| 1 | LED module | 1 |
| 2 | Buzzer module | 1 |
| 3 | Variable Pot 10k | 1 |
| 4 | Slide Switch 3 pin | 1 |
| 5 | 1 Channel Relay with LED | 1 |
| 6 | LDR module | 1 |
| 7 | Capacitive touch | 1 |
| 8 | Sound Sensor | 1 |
| 9 | RGB led | 1 |
| 10 | DHT22 | 1 |
| 11 | LCD Display 16*2 | 1 |
| 12 | Infrared Emitter | 1 |
| 13 | Traffic light module | 1 |
| 14 | PIR | 1 |
| 15 | Ultrasonic | 1 |
| 16 | Rain Detection | 1 |
| 17 | Soil Moisture | 1 |
| 18 | 7 Segment display 1 Digit | 1 |
| 19 | Pushbutton Switch | 1 |
| 20 | Water level | 1 |
| 21 | DC motor water pump | 1 |
| 22 | IR Recevier | 1 |
Resistors
| S.NO | Resistors | Quantity |
|---|---|---|
| 1 | 0R | 20 |
| 2 | 10R | 20 |
| 3 | 100R | 20 |
| 4 | 220R | 20 |
| 5 | 330R | 20 |
| 6 | 470R | 20 |
| 7 | 680R | 20 |
| 8 | 1K | 20 |
| 9 | 1.5K | 20 |
| 10 | 2.2K | 20 |
| 11 | 3.3K | 20 |
| 12 | 4.7K | 20 |
| 13 | 5.1K | 20 |
| 14 | 6.8K | 20 |
| 15 | 12K | 20 |
| 16 | 15K | 20 |
| 17 | 18K | 20 |
| 18 | 22K | 20 |
| 19 | 27K | 20 |
| 20 | 33K | 20 |
| 21 | 47K | 20 |
| 22 | 82K | 20 |
| 23 | 100K | 20 |
| 24 | 470K | 20 |
| 25 | 680K | 20 |
| 26 | 1M | 20 |
Capacitors
| S.NO | Capacitors | Quantity |
|---|---|---|
| 1 | Electrolytic 1uF | 20 |
| 2 | Electrolytic 2.2uF | 20 |
| 3 | Electrolytic 4.7uF | 20 |
| 4 | Electrolytic 22uF | 20 |
| 5 | Electrolytic 47uF | 20 |
| 6 | Electrolytic 100uF | 20 |
| 7 | Electrolytic 1000uF | 20 |
LEDs
| S.NO | LEDs | Quantity |
|---|---|---|
| 1 | Green LED | 20 |
| 2 | Red LED | 20 |
| 3 | Blue LED | 20 |
| 4 | White LED | 20 |
| 5 | Yellow LED | 20 |
| 6 | RGB 2 Pin | 20 |
Advanced Electronics Kit
The Advanced Electronics Kit offers a comprehensive set of high-quality modules and interfaces, including multi-digit displays, OLED screens, motor drivers, multi-channel relays, and IR communication components.
Overview
Designed for professional prototyping, it enables the development of sophisticated embedded and IoT applications with enhanced control and visualization capabilities.
Kit Includes
- Arduino Development Board ( Developed By Atya Technologies ) 1U
- Mini USB Cable 1U
- Power Adapter 12v 1 Amp 1U
- Breadboard 1U
- Multimeter 1U
- Diodes (1N4007) 1U
- Voltage Regulator 7805 with heatsink 1U
- DC motor with fan blades 1U
Jumper Wires
| S.NO | Jumper Wires | Quantity |
|---|---|---|
| 1 | M-M | 40 |
| 2 | M-F | 40 |
| 3 | F-F | 40 |
| Table Data | Table Data | |
Connectors
| S.NO | Connectors | Quantity |
|---|---|---|
| 1 | 1*4 | 5 |
| 2 | 1*6 | 2 |
| 3 | 1*7 | 2 |
Sensors
| S.NO | Sensors | Quantity |
|---|---|---|
| 1 | 1 Channel flame with Relay | 1 |
| 2 | IR TX/RX | 1 |
| 3 | Ambient light | 1 |
| 4 | OLED Display | 1 |
| 5 | SHTC3 | 1 |
| 6 | Vibration sensor | 1 |
| 7 | Hall Sensor | 1 |
| 8 | Tilt Sensor | 1 |
| 9 | MQ2 sensor Co, LPG | 1 |
| 10 | MQ3 sensor Alcohol | 1 |
| 11 | BMP280 | 1 |
| 12 | 5 Channel flame sensor | 1 |
| 13 | Motor Driver IC | 1 |
| 14 | 4 channel relay | 1 |
| 15 | 4 digit seven segment | 1 |
| 16 | Touch sensor | 1 |
| 17 | Ultrasonic | 1 |
Resistors
| S.NO | Resistors | Quantity |
|---|---|---|
| 1 | 0R | 20 |
| 2 | 10R | 20 |
| 3 | 100R | 20 |
| 4 | 220R | 20 |
| 5 | 330R | 20 |
| 6 | 470R | 20 |
| 7 | 680R | 20 |
| 8 | 1K | 20 |
| 9 | 1.5K | 20 |
| 10 | 2.2K | 20 |
| 11 | 3.3K | 20 |
| 12 | 4.7K | 20 |
| 13 | 5.1K | 20 |
| 14 | 6.8K | 20 |
| 15 | 12K | 20 |
| 16 | 15K | 20 |
| 17 | 18K | 20 |
| 18 | 22K | 20 |
| 19 | 27K | 20 |
| 20 | 33K | 20 |
| 21 | 47K | 20 |
| 22 | 82K | 20 |
| 23 | 100K | 20 |
| 24 | 470K | 20 |
| 25 | 680K | 20 |
| 26 | 1M | 20 |
Capacitors
| S.NO | Capacitors | Quantity |
|---|---|---|
| 1 | Electrolytic 1uF | 20 |
| 2 | Electrolytic 2.2uF | 20 |
| 3 | Electrolytic 4.7uF | 20 |
| 4 | Electrolytic 22uF | 20 |
| 5 | Electrolytic 47uF | 20 |
| 6 | Electrolytic 100uF | 20 |
| 7 | Electrolytic 1000uF | 20 |
LEDs
| S.NO | LEDs | Quantity |
|---|---|---|
| 1 | Green LED | 20 |
| 2 | Red LED | 20 |
| 3 | Blue LED | 20 |
| 4 | White LED | 20 |
| 5 | Yellow LED | 20 |
| 6 | RGB 2 Pin | 20 |
ICs
| S.NO | ICs | Quantity |
|---|---|---|
| 1 | 74HC157 MULTIPLEXER DIP-16 | 1 |
| 2 | NE555 DIP-8 | 1 |
Switches
| S.NO | Switches | Quantity |
|---|---|---|
| 1 | Rocker | 5 |
| 2 | Push Button | 5 |
Transistors
| S.NO | Transistors | Quantity |
|---|---|---|
| 1 | BC547 | 10 |
| 2 | BC5557 | 10 |
Home Automation & Robotics Kit with IoT
The Home Automation & Robotics Kit with IoT combines smart sensors, actuators, and connectivity modules to enable seamless automation and remote control of home environments and robotic systems.
Overview
Designed for IoT integration, it empowers users to develop intelligent, connected solutions for enhanced convenience, security, and efficiency.
Kit Includes
- Arduino Development Board ( Developed By Atya Technologies ) 1U
- Mini USB Cable 1U
- Power Adapter 12v 1 Amp 1U
- Breadboard 1U
- Multimeter 1U
- Diodes (1N4007) 1U
- Voltage Regulator 7805 with heatsink 1U
- DC motor with fan blades 1U
Jumper Wires
| S.NO | Jumper Wires | Quantity |
|---|---|---|
| 1 | M-M | 40 |
| 2 | M-F | 40 |
| 3 | F-F | 40 |
| Table Data | Table Data | |
Connectors
| S.NO | Connectors | Quantity |
|---|---|---|
| 1 | 1*4 | 5 |
| 2 | 1*6 | 2 |
| 3 | 1*7 | 2 |
Sensors
| S.NO | Sensors | Quantity |
|---|---|---|
| 1 | 1 Channel flame with Relay | 1 |
| 2 | IR TX/RX | 1 |
| 3 | Ambient light | 1 |
| 4 | OLED Display | 1 |
| 5 | SHTC3 | 1 |
| 6 | Vibration sensor | 1 |
| 7 | Hall Sensor | 1 |
| 8 | Tilt Sensor | 1 |
| 9 | MQ2 sensor Co, LPG | 1 |
| 10 | MQ3 sensor Alcohol | 1 |
| 11 | BMP280 | 1 |
| 12 | 5 Channel flame sensor | 1 |
| 13 | Motor Driver IC | 1 |
| 14 | 4 channel relay | 1 |
| 15 | 4 digit seven segment | 1 |
| 16 | Touch sensor | 1 |
| 17 | Ultrasonic | 1 |
Resistors
| S.NO | Resistors | Quantity |
|---|---|---|
| 1 | 0R | 20 |
| 2 | 10R | 20 |
| 3 | 100R | 20 |
| 4 | 220R | 20 |
| 5 | 330R | 20 |
| 6 | 470R | 20 |
| 7 | 680R | 20 |
| 8 | 1K | 20 |
| 9 | 1.5K | 20 |
| 10 | 2.2K | 20 |
| 11 | 3.3K | 20 |
| 12 | 4.7K | 20 |
| 13 | 5.1K | 20 |
| 14 | 6.8K | 20 |
| 15 | 12K | 20 |
| 16 | 15K | 20 |
| 17 | 18K | 20 |
| 18 | 22K | 20 |
| 19 | 27K | 20 |
| 20 | 33K | 20 |
| 21 | 47K | 20 |
| 22 | 82K | 20 |
| 23 | 100K | 20 |
| 24 | 470K | 20 |
| 25 | 680K | 20 |
| 26 | 1M | 20 |
Capacitors
| S.NO | Capacitors | Quantity |
|---|---|---|
| 1 | Electrolytic 1uF | 20 |
| 2 | Electrolytic 2.2uF | 20 |
| 3 | Electrolytic 4.7uF | 20 |
| 4 | Electrolytic 22uF | 20 |
| 5 | Electrolytic 47uF | 20 |
| 6 | Electrolytic 100uF | 20 |
| 7 | Electrolytic 1000uF | 20 |
LEDs
| S.NO | LEDs | Quantity |
|---|---|---|
| 1 | Green LED | 20 |
| 2 | Red LED | 20 |
| 3 | Blue LED | 20 |
| 4 | White LED | 20 |
| 5 | Yellow LED | 20 |
| 6 | RGB 2 Pin | 20 |
ICs
| S.NO | ICs | Quantity |
|---|---|---|
| 1 | 74HC157 MULTIPLEXER DIP-16 | 1 |
| 2 | NE555 DIP-8 | 1 |
Switches
| S.NO | Switches | Quantity |
|---|---|---|
| 1 | Rocker | 5 |
| 2 | Push Button | 5 |
Transistors
| S.NO | Transistors | Quantity |
|---|---|---|
| 1 | BC547 | 10 |
| 2 | BC5557 | 10 |
PCB Design & Simulation
By the end of the course, participants will design their microcontroller Board.
Overview
Designed for IoT integration, it empowers users to develop intelligent, connected solutions for enhanced convenience, security, and efficiency.
Module 1: Introduction to PCB Design
- What is a PCB?
- Categories of PCB.
- PCB is made up of…
- What are the components PCB consists of?
- Types of Electronic Components
- Active Components
- Passive Components
- Types of components packages
- THT package components
- SMT package components
- PCB Specification Selection
- Types of Manufacturing process
- KiCad Installation Guide
Module 3: Understanding Schematics
- What are schematics?
- Purpose of Schematics
- Schematic Editor Overview
Module 5: Creating your first Project in CAD
- Starting a new project step by step
- Adding components on sheet
- ATmega328P and FT232RL symbol creation
Module 7: PCB Editor Basics
- Understanding PCB Layers and Stackup
- PCB Editor UI Overview
Module 9: PCB Layout
- What is a Footprint Editor?
- How to create Atmega328P and FT232RL ICs footprints in footprint editor
Module 11: Preparing for PCB Fabrication
- Final DRC check.
- Gerber File Generation.
Module 13: Assembly & Soldering
- Fabrication of Bare PCB
- Component Sourcing
- Stencil Preparation (for SMT)
- Solder Paste Application
- Pick-and-Place Assembly
- Reflow or Wave Soldering
- Through-Hole Component Insertion
- Manual Soldering & Inspection
- Quality Testing (ICT/FCT/Visual)
- Packaging & Delivery
Module 2: Introduction to KiCAD Software
- What is KiCad?
- How to install KiCad (Step by Step)?
- Overview of the Interface
Module 4: Schematic Editor Library Management
- Symbols
- Symbol Creation
- Annotations
- Sample schematics
Module 6: Schematic Design Deep Dive
- Component Placement
- Wiring components to complete circuit
- Annotating the circuit
- ERC Check
Module 8: PCB Layout Fundamentals
- Footprint Editor
- How to create footprint of resistor, capacitor & DIP-8 IC
Module 10: Completing PCB layout
- Placement of Components
- Tracing the pads of components as per circuit
- Adding Vias
- Deciding border of circuit pcb
- Adding F.Silkscreen text
- DRC check
Module 12: Ordering Components & PCBs
- BOM Generation
- Searching for Components through web platforms
- Sorting local vendors to buy components
- Purchasing Components
- Placing order for PCBs in JLCPCB
- Placing order for PCBs in PCB Power
Module 14: Testing & Verification
- Pre-Power-Up Inspection (Dry Check)
- Power-Up Sequence
- Voltage Rail Verification
- Functional Testing (FCT)
- Troubleshooting Guide
Practice Examples :
- Relay Module
- Touch Sensor Module
- Mobile Charger Module
- Flame Detection Module
- Sound detection Module
- LDR Module
- Rain detection sensor
- Temperature & Humidity Module
- Gas detection module
Bonus :
- ATmega nano development board
- Nodemcu development board
Embedded Development Kit
“Build Intelligent Systems with Embedded Hardware”
Overview
Master the foundation of real-time embedded systems with microcontrollers, sensors, and hands-on projects.
What's Included in the Kit (Stage 2/3 Kit) :
- ESP32 Microcontroller (supports bare-metal programming)
- Breadboard + Jumper Wires
- LEDs (Red, Green, Blue)
- Push Buttons, Resistors, Buzzer
- LM35 Temperature Senso
- LDR Light Sensor
- Ultrasonic Sensor (HC-SR04)
- Servo Motor + DC Motor
- Motor Driver Module (L298N)
- OLED Display
- FTDI USB Programmer / USB Cable
- Power Supply Cable / Battery Connector
Topics Covered :
- Introduction to Embedded Systems
- Embedded C Programming for Microcontrollers
- Digital & Analog Input/Output Control
- Timers, Interrupts, PWM Signals
- UART, SPI, I2C Communication Protocols
- ADC & Real-Time Sensor Data Processing
- Debugging Techniques & Firmware Uploading
- Edge Device Optimization Techniques
Hands-On Projects You'll Build :
- Temperature Display System
- Motion-Triggered Security Alarm
- Password-Protected Lock with Keypad
- Line Follower Robo
- Object Counter using Ultrasonic Sensor
- PWM-Based Fan Speed Controller
- Smart Lighting with Auto Shutoff
Deliverables :
- 20+ Embedded Projects
- 40+ Structured Learning Hours
- Source Code + Circuit Diagrams
- Printable Project Booklet (PDF)
- Completion Certificate + Internship Track
- Full Access to Online Learning Portal
Pricing :
| Category | Inclusions | Price |
|---|---|---|
| New Learners | Kit + Course + Portal Access | ----- |
| Existing Kit Owners (Stage 2/3 Kit) | Course + Portal Access Only | ----- |
IoT Development Kit
“Connect. Monitor. Automate. The Complete IoT Journey”
Overview
Build smart IoT devices and visualize data in real time using our custom Blockly-based web dashboard.
What's Included in the Kit (Stage 3 Kit) :
- ESP32 / NodeMCU Wi-Fi Microcontroller
- DHT11 Temperature & Humidity Sensor
- Gas Sensor (MQ-2 or MQ-135)
- Flame Sensor
- 2-Channel or 4-Channel Relay Module
- OLED Display
- Buzzer, LEDs, Resistors
- Jumper Wires + Breadboard
- USB Cable + Power Adapter
Topics Covered :
- IoT Architecture & Ecosystem Overview
- ESP32/NodeMCU Setup + OTA Firmware Updates
- Cloud Platforms: Blynk, Firebase, ThingSpeak
- MQTT Protocol & Mosquitto Broker
- Real-Tme Cloud Data Logging
- Blockly-Based Custom Dashboard Integration
- Mobile App Control (Android/iOS)
- Edge vs Cloud Data Processing & Deployment
IoT Projects You'll Build:
- Cloud-Connected Weather Station
- Smart Door Lock with OTP Access
- Fire/Gas Alert System with SMS Alerts
- Energy Monitoring with Live Dashboard
- Plant Health Monitor with Notifications
- GPS Tracker with Live Map UI
- Voice-Controlled Home Automation via Google Assistant
Deliverables :
- 25+ Cloud-Integrated IoT Projects
- 50+ Learning Hours
- Access to Custom Blockly Web Dashboard
- Mobile App Templates + Firebase Toolkit
- Internship Projects + Certificate
- Masterclass Access (MQTT, Firebase, App Integration)
Pricing :
| Category | Inclusions | Price |
|---|---|---|
| New Learners | Kit + Course + Portal Access | ----- |
| Existing Kit Owners (Stage 3 Kit) | Course + Portal Access Only | ----- |
